Designing and constructing with the wedi building board
The wedi building board can also be the used for creation of steps and platforms in domestic applications only. After cutting and installation the wedi building board can be finished with any tile based surface covering (min tile dimensions 10 x 10 cm).
Step 1Cut wedi building board to size for creation of the platform struts.
Step 2Apply wedi 610 adhesive sealant to the surface edges, set a maximum distance apart of 40cm.
Step 3Affix building board as cover onto the platform struts using wedi 610 adhesive sealant. Board joints must always be supported and correspond to a strut beneath.
Step 4Apply self-adhesive wedi Tools reinforcement tape to all joints.