Find your route faster:

Shower wall construction wedi Fundo Trollo and Nautilo design showers

wedi Fundo Trollo and Fundo Nautilo design showers consist of a floor element and the associated partitions. They are made of the base material wedi building board and are equipped with a watertight floor drain (optionally horizontal or vertical), an additional waterproof coating and a predetermined slope. The installation instructions are shown below using the example of Fundo Trollo.

Apply wedi 610 adhesive sealant in a wave shape into the milled out, into which the individual wall elements are then placed.
The wall elements are connected to each other by means of a tongue and groove and wedi 610 adhesive sealant, which is applied to the groove and to the left and right of the spring.
Then install the wall elements one after the other in accordance with the installation instructions.
Fitted with wedi tools joint reinforcement tape on the inside and outside of butt joints.
Seal the transition between the shower walls and the floor plate inside with wedi 610 adhesive and sealant.
Then, as usual, install the tiling as well as the desired fitting and, if necessary, the shower rod.
Optional increase is possible through the extension collar. Fasten with wedi 610 adhesive sealant and affix with wedi tools joint reinforcement tape.