Product information
For a secure hold underneath the tiles. Heavy objects, such as fittings and glass doors, can be attached securely with the mounting set. Depending on the load, the larger or smaller reinforcing plate contained in the set can be used. The plate is easily integrated into a suitable recess in the wedi structural panel with wedi 610 adhesive sealant.
Since the material is moisture-resistant, it can also be used in heavy traffic wet areas.
Content:
2 mounting plates in 400 x 50 x 15 mm format
12 mounting plates in 100 x 100 x 8 mm format
Technical Details
If the adhesive value is exceeded by the screw retention value with the use of multiple screws per mounting plate then the adhesive value should be taken into account as a limiting factor.
| Technical properties wedi Tools fixings set | |
|---|---|
| Measurements | 100 x 100 x 8 mm |
| Adhesive value (Mounting plate on building board) | 800 N = 160 kg |
| Resistance to withdrawal of screws with a 4.5mm thick wooden screw (per screw from the mounting plate) | 400 N = 40 kg |
| Measurements | 400 x 50 x 15 mm* |
| Adhesive value (Mounting plate on building board) | 1600 N = 160 kg |
| Resistance to withdrawal of screws with a 4.5mm thick wooden screw (per screw from the mounting plate) | 1000 N = 100 kg |
| *Designed for a 1000 × 2000 × 8 mm glass door, for example, with the use of two mounting plates. | |
| Adhesive value (Mounting plate on building board) | ca. 1.1 % |
| Coefficient of linear expansion | ca. 28.375•10-6 K-1 |
| Building material class according to | B2 |
| IMPORTANT: If the adhesive value is exceeded by the screw retention value with the use of multiple screws per mounting plate then the adhesive value should be taken into account as a limiting factor. | |
Usage
For mounting of heavy objects such as heated towel racks, handles, cabinet elements or glass doors on tiled or plastered wedi walls/constructions.
Thanks to its resistance against humidity, the material may also be applied in highly demanding wet areas.