wedi Fundo sealing corners
Suitable installation material to securely seal angle joints and gradients of Fundo shower elements.
Technical properties - Fundo sealing corners for Fundo Riolito, Riolito Neo and Plano Linea
|Type||Polypropylene fleece-coated TPE|
|Overall thickness||approx. 0,60 mm|
|Maximum longitudinal tensile strength||approx. 111 N / 15 mm|
|Maximum lateral tensile strength||approx. 51 N / 15 mm|
|Elongation at break, longitudinal||approx. 113 %|
|Elongation at break, lateral||approx. 371 %|
|Resistance to water pressure (1.5 bar)||> 1.5 bar|
|Resistant to chemicals||specified in accordance with construction and testing principles|
|UV resistance||> 500 h|
|Temperature resistance||-30°C / +90°C|
Areas of application Fundo sealing corners for Fundo Riolito, Riolito Neo and Plano Linea
For the reliable sealing of corner and butt joints.
When sealing joints, wedi Fundo sealing corners must be cemented into the fresh thin-bed mortar / sealant / epoxy resin adhesive /wedi 610 and pressed in with a smoothing trowel, depending on the load. When using epoxy resin adhesive, the surface must be cemented over and sprinkled with quartz sand.
wedi Fundo sealing corners must overlap by at least 5 cm. The appropriate wedi Tools sealing sleeves are used when sealing floor drains and intersections. If you use materials according to abP/ETA, please observe the applicable processing guidelines.