Product information
wedi Top Wall is a ready-to-install wall surface for bathrooms and wet areas. The large-format panels can be used for an individual feature wall or across the entire room, providing greater design freedom and a more continuous finish with fewer visible joints than conventional tiling.
Available in a wide selection of colours, textures and finishes, the panels can be cut to the required dimensions and shaped around fittings, helping to create project-specific wall designs in both new-build and refurbishment projects.
When installed using the specified wedi system components, Top Wall supports a waterproof wall construction. The durable, easy-to-clean surfaces are designed for everyday bathroom use. Small scratches in the natural stone-look variants can be repaired using the appropriate wedi Top repair accessories.
Natural stone look
Inspired by the colours and textures of natural stone, this structured surface brings depth and character to the bathroom. The 6 mm material is coloured throughout, so cut edges retain a consistent colour.
Monochrome look
A smooth, understated surface with a silky appearance. The 6 mm panels provide a simple, timeless backdrop for contemporary and traditional bathroom schemes.
Marble look
A finely textured, matt surface inspired by natural marble. The 4 mm composite material contains 70% recycled marble, combining a distinctive finish with a slimmer panel construction.
System compatible
Design freedom
Lightweight
Hygienic
Durable
Install the ready-to-use Top Wall design surface
See how wedi Top Wall is measured, cut and installed using the specified wedi system components.
Technical Details
Technical properties vary according to the selected surface. Compare material composition, thickness, weight, temperature resistance and other performance characteristics of the different variants below.
| wedi Top Wall - natural stone look (available colours: stone grey, sahara beige, concrete grey and carbon black) | |
|---|---|
| Material | Mineral and vinyl composite material |
| Material thickness | 6 mm |
| Weight | 9,0 kg/m² |
| Coefficient of thermal expansion | 7.07 x 10-5 K¯¹ (DIN 53752) |
| Bending strength | 80 MPa (DIN 53452) |
| Ball indentation hardness | 260 N/mm² (in accordance with DIN ISO 2039-1) |
| Tensile strength | 45 MPa (DIN 53455) |
| Continuous temperature resistance | up to 70°C (in accordance with DIN EN ISO 13894-1) |
| Water resistance | present |
| Suitable for underfloor / wall heating | yes |
| Ability to resist temperature changes | passed (-50°C/+70°C) |
| Fire behaviour | E (in accordance with EN 13501-1) |
| Bacterial resistance | resistant to mould and bacterial contamination (in accordance with DIN EN ISO 846 A/C), demonstrable reduction of bacteria on the surface (up to 99.9% within 24 hours in accordance with JIT Z 2801) |
| Chemical resistance | resistant to normal household chemicals |
| Scratch resistance | present (see care instructions) |
| Impact resistance | present |
| Floor impact resistance performance class | Performance class 33 for areas with heavy use such as: shop fitting / hotels (in conformity with DIN EN 13329) |
| Cuttability | Can be worked with all common tools, such as a hand-held circular saw. A jigsaw can be used for recesses in the wedi Top Wall for fittings. |
| Slip resistance | B (in accordance with DIN 51097) |
| Wheel-chair navigability | present |
| Cleanability | easy to clean (see care instructions) |
| Ease of disposal | Waste code 170203 construction and demolition waste |
| Surface quality | textured natural stone look |
| Feel | heat-retaining |
| wedi Top Wall - monochrome look (available colours: pure white, flake white) | |
|---|---|
| Material | Acrylic resin bonded mineral material |
| Material thickness | 6 mm |
| Weight | 9,6 kg/m² |
| Coefficient of thermal expansion | 5.6 · 10-6 · K¯¹ (in accordance with DIN 53752) |
| Bending strength | 65 N/mm² (in accordance with DIN EN 310) |
| Ball indentation hardness | 260 N/mm² (in accordance with DIN ISO 2039-1) |
| Tensile strength | 37 MPa (in accordance with DIN EN ISO 527) |
| Continuous temperature resistance | up to 70°C (in accordance with DIN EN ISO 13894-1) |
| Water resistance | present |
| Suitable for underfloor / wall heating | yes |
| Ability to resist temperature changes | passed (-50°C/+70°C) |
| Fire behaviour | E (in accordance with EN 13501-1) |
| Bacterial resistance | resistant to mould and bacterial contamination (in accordance with DIN EN ISO 846 A/C), demonstrable reduction of bacteria on the surface (up to 99.9% within 24 hours in accordance with JIT Z 2801) |
| Chemical resistance | resistant to normal household chemicals |
| Scratch resistance | present (see care instructions) |
| Impact resistance | present |
| Floor impact resistance performance class | Performance class 33 for areas with heavy use such as: shop fitting / hotels (in conformity with DIN EN 13329) |
| Cuttability | Can be worked with all common tools, such as a hand-held circular saw. A jigsaw can be used for recesses in the wedi Top Wall for fittings. |
| Slip resistance | B (according to DIN 51097) |
| Wheel-chair navigability | present |
| Cleanability | easy to clean (see care instructions) |
| Ease of disposal | Waste code 170203 construction and demolition waste |
| Surface quality | homogeneous surface |
| Feel | heat-retaining |
| wedi Top Wall - Marble look marble look (available colours: marble white, marble grey-beige) | |
|---|---|
| Material | Natural stone-plastic composite material |
| Material thickness | 4 mm |
| Weight | 8.19 kg/m² |
| Permanent temperature resistance | up to 50 °C (according to DIN EN ISO 13894-1) |
| Dimensional stability | ≤0.25% |
| Water resistance | is provided |
| Alternating temperature resistance | passed (-50 °C/+70 °C) |
| Optimal processing temperature | 15 °C - 30 °C |
| Fire behavior | C ‑ s1, d0 |
| Chemical resistance | Resistant to household chemicals (according to EN 438-2) |
| Scratch resistance | is provided (see care instructions) |
| Impact resistance | is provided |
| Workability | Can be cut with conventional tools, such as a hand-held circular saw. A jigsaw can also be used for cutting recesses into the wedi Top Wall |
| Slip-rating | A (according to DIN 51097) |
| Wheelchair access | not provided |
| Point load as shower chair | not provided |
| Steam bath suitability | not provided |
| Maitenance | Easy to clean (see care instructions) |
| Disposal | Waste key 170203 Construction and demolition waste |
| Surface finish | Durable decorative foil |
| Feel | heat-retaining |
Downloads
Usage
Installation:
wedi Top Wall can be installed on a wide range of common substrates, including existing tiles, plaster, plasterboard and wedi building boards. The substrate must be stable, level and prepared in accordance with the installation instructions.
Panels can be cut to the required dimensions using common tools. Straight cuts can be made using a hand-held circular saw, while a jigsaw can be used to form openings for taps, controls and other fittings.
Always check the relevant installation guidance to confirm compatibility for the planned application. Install the panels using the specified wedi adhesive sealant and follow the relevant installation instructions for the chosen substrate and application.
Transport and storage:
Handle the panels carefully during transport. Keep them in their original packaging. Transport and store them horizontally to help prevent damage.
Care, cleaning and repair:
Follow the separate care instructions supplied with the product when cleaning or maintaining the surface. The instructions are also available in the Downloads section.
Small scratches in natural stone-look surfaces can be treated using the appropriate wedi Top repair accessories – these can be found in the Spare parts section.
