Find your route faster:

Fundo Riolito Profile | Slope wedge

Flush-to-floor shower systems

The wedi Fundo Riolito profile is specially designed for the Fundo Riolito floor element. It enables an optically high-quality transition from the slope of the floor element to the flat floor covering. It is available in right and left-hand versions as well as in different heights and is also easy to install. For flush-to-floor showers, this slope profile offers a strong combination of design and protection.

The Fundo Riolito Neo / Plano Linea Profile is prefabricated as standard for use on a Fundo Riolito Neo / Plano Linea Floor Element with a length of 1200 mm ...
... However, it is possible, for example, to cut to length at the marked notch when using a Fundo Riolito Neo / Plano Linea floor element with a length of 900mm.
Apply wedi 320 tile adhesive to the alternative sealing (wedi tools sealing tape and Fundo sealing set) – in the transition area between the Fundo floor element and the screed...
... And insert the slope profile. The Riolito Neo / Plano Linea profile is available in the execution on the left and right. The correct side is determined from the viewing direction to the floor drain.
wedi 320 Comb on the tile adhesive and press in the tile.
Finally, tile and grout the floor element. In the picture: Profile on the left.