Product information
If you would prefer, or indeed have to, fit your shower into the corner of a room, yet still want to include curved lines in your design concept, then wedi Fundo Borgo shower elements are just the thing. Design and functionality combined in one product.
The tileable shower units are not only highly practical and reliable, but they have also opened up a whole new world of design possibilities for wet rooms and bathrooms.
- Certainty thanks to a uniform predefined slope
- Entire system is 100% waterproof
- Simple and safe to work with - tested by those in the trade
Technical Details
For impact sound insulated floor structures, installation of impact sound insulation under wedi Fundo and perimeter isolation strips should be planned: Construction using wedi Nonstep Plan impact sound deadening boards (6 mm rubber granulate insulation element, Δ L W,R = 14 dB in accordance with DIN 52210). Alternatively, approved polythene membranes may be used.
Permitted noise level in accordance with DIN 4109 LIn ≤ 30 dB(A) and in accordance with VDI 4100 SSt III ≤ 25 dB (A), caused by water: complied with using wedi Fundo and Nonstep Plan.
wedi Fundo shower elements can be cut to size on site, the geometry of the elements should be maintained however. wedi Fundo shower elements can only be combined with the wedi Fundo drains.
Technical properties - Fundo Borgo | |
---|---|
Wheelchair load-bearing from minimum tile size | 50 x 50 mm |
Glass mosaic from minimum size | 20 x 20 mm |
Minimum foundation height depending on the drain: | |
horizontal drain, DN 50 | 85 mm |
horizontal drain Minimax, DN 40 | 57 mm |
vertical drain , DN 50 | 142 mm |
Surface slope (from outer edge of Fundo floor element to outer edge of drain opening) | 18 mm |
Technical properties of drain | |
---|---|
Frame with stainless steel grille available in the following dimensions: | 115 × 115 mm | Ø 115 mm |
Drain performance depending on the drain selected: | |
Fundo drain Minimax, horizontal, DN 40 ABS, tested based on DIN EN 1253 (abP test number P-4081-TLRP) | 0,50 l/s ; 30,0 l/min |
Fundo drain, horizontal, DN 50 ABS, according to DIN EN 1253 | 0,80 l/s ; 48,0 l/min |
Fundo drain, vertical, DN 50 PP, according to DIN EN 1253 | 1,10 l/s ; 66,0 l/min |
Fundo drain, vertical, DN 50 PP, according to DIN EN 1253 with fire protection collar | 1,10 l/s ; 66,0 l/min |
Fundo drain, vertical, DN 70 PP, according to DIN EN 1253 | 1,0 l/s ; 60,0 l/min |
Technical properties of raw foam building board systems | |
---|---|
Extruded polystyrene rigid foam core | XPS |
Long-term compressive strength (50 years) ≤ 2 % compression EN 1606 | 0,08 N/mm² |
Compressive resistance at 10 % compression EN 826 | 0,25 N/mm² |
Thermal conductivity EN 13164 | 0,036 W/mK |
Bulk density EN 1602 | 32 kg/m³ |
Temperature limits | -50 °C / +75 °C |
Fire behaviour EN 13501-1 | E |
Tested waterproofness | 1,5 bar |
Downloads
Usage
- In domestic residential construction
- In publicly accessible buildings and workplaces complying with DIN 18040 part 1
- In accessible dwellings complying with DIN 18040 part 2;(note specifications for minimum tile size if wheelchair access is planned, see technical properties)
- As a construction seal combined with tile and natural stone (floors subject to moderate surface flowing water in interior areas; directly loaded floors in rooms in which tap or cleaning water is used very frequently or for long periods, and floors of indoor and outdoor pools that are filled with water with the properties of drinking water).