Find your route faster:

Design and construct with the wedi building board

The wedi building board also enables the creation of stages and platforms. After the substructure has been cut to size and the cover has been applied, the wedi building board can be covered with any surface covering (minimum tile size: 10 x 10 cm).

Cut wedi building board for the substructure.
Apply wedi 610 adhesive and sealant to the substrate at intervals of no more than 40 cm.
Cover the building board with wedi 610 adhesive and sealant. There must always be a vertical support in the joint area.
Apply wedi tool self-adhesive joint reinforcement tape to all joints.