Find your route faster:

Reinforcement plate for wedi building board

In order to further stabilize wall and floor surfaces, reinforcement plates can be integrated into the wedi building board. In just a few steps, you can create additional stability for heavy objects such as wall shelves, towel racks or radiators. Reinforcement plates = multi-layer plates such as phenolic plywood

Mark the exact position of the reinforcement plate.
Use a router to trim out the marked area. The depth depends on the thickness of the reinforcement plate. The adhesive adds 2 mm of application.
Glue the reinforcement plate flush with the surface using wedi 610 adhesive and sealant.
Then use wedi tools to self-adhesive reinforcement tape.
Finally, mark the reinforcement plate, e.g. B with a centrally positioned screw.

Product overview

Relevant products for the installation of reinforcement plates
  • wedi building board
    Building board
  • wedi Tools fixings set
  • wedi Tools joint reinforcement tape
  • wedi 610
    wedi 610 adhesive sealant