Find your route faster:

Fundo Riolito Profile | Slope wedge

Flush-to-floor shower systems

The wedi Fundo Riolito profile is specially designed for the Fundo Riolito floor element. It enables an optically high-quality transition from the slope of the floor element to the flat floor covering. It is available in right and left execution as well as in different heights and is also easy to install. For flush-to-floor showers, this new slope profile offers a strong combination of design and protection.

The Fundo Riolito Profile is standard for use on a Fundo Riolito Floor Element with a length of 1200 mm...
... However, it is possible, for example, to cut to length at the marked notch when using a Fundo Riolito floor element with a length of 900mm.
Apply wedi 320 tile adhesive to the alternative sealing (wedi tools sealing tape and Fundo sealing set) – in the transition area between the Fundo floor element and the screed...
... And insert the slope profile. The Riolito profile is available in the Execution on the left and right. The correct side is determined from the viewing direction to the floor drain.
wedi 320 Comb on the tile adhesive and press in the tile.
Finally, tile and grout the floor element. In the picture: Profile on the left.