Find your route faster:

Point drainage on suspended timber floors - Fundo Ligno Plus

Flush-to-floor shower systems

In addition to the integrated version, there is also the possibility to process the wedi Fundo Ligno Plus floor element on the suspended timber floors. For the equally simple installation, the height-balancing wedi building boards are also inserted. Sealing of the impacts is done with wedi 610.

Cut out the layer of wooden beams in the area of the drain pot and remove the insulation material underneath.
In the area of the drain pot, build a formwork (35 x 35 cm) ...
... And check the seat of the drains.
Close all openings except those of the drain pot with boards.
Check the drain position.
Fill the recess with earth-damp screed.
Complete the wooden floor with primer.
Insert the O-ring into the groove of the plastic frame from above and screw the shower cup screw valve with the main sealing collar.
Full-surface application of wedi 320 Tile Adhesive on the Bottom of the Shower Element.
Check the flow position of the wedi Fundo Ligno Plus elements and adjust if necessary
Commit the elements for 12 hours.
Raise the drain frame to the top of the tile and fix it in the adhesive bed.
If the tile thickness is more than 15 mm, the extension collar is used to adjust the height.
Tile elements. Insert the shower insert and odor trap.
Insert stainless steel grate. Cleaning of the siphon is possible at any time.

The wedi building board range

Under the Tile is required
wedi building board
Building board
Wedi building boards XL and XXL
Building board XL and XXL
Vapor building board
Construct building board
PreLine building board