Fundo Trollo & Fundo Trollo libero: Design showers for modern bathrooms

Shower wall construction wedi Fundo Trollo & Fundo Trollo libero design showers

wedi Fundo Trollo and Fundo Trollo libero design showers consist of a floor element and the associated partitions. They are made of the base material wedi building board and are equipped with a watertight floor drain (optionally horizontal or vertical), an additional waterproof coating and a predetermined slope.

Apply wedi 610 adhesive sealant in a wave shape into the milled out, into which the individual wall elements are then placed.

The wall elements are connected to each other by means of a tongue and groove and wedi 610 adhesive sealant, which is applied to the groove and to the left and right of the spring.

Then install the wall elements one after the other in accordance with the installation instructions.

Fitted with wedi tools joint reinforcement tape on the inside and outside of butt joints.

Seal the transition between the shower walls and the floor plate inside with wedi 610 adhesive and sealant.

Then, as usual, install the tiling as well as the desired fitting and, if necessary, the shower rod.

Optional increase is possible through the extension collar. Fasten with wedi 610 adhesive sealant and affix with wedi tools joint reinforcement tape.

Installing a Fundo Trollo design shower

This content is provided by YouTube. By loading this content, you consent to the transfer of your data to YouTube / Google. You can find more information about this here: Google Privacy.

wedi | EN - Training: Fundo Trollo

Fundo Trollo
Point drain
wedi 610 adhesive sealant
wedi 320 universal tile adhesive