Find your route faster:

Voltage decoupling with wedi Subliner Flex

Subliner Flex is used for safe decoupling and for stress reduction between ceramic tiles, slabs and natural stone surfaces and the surface in indoor areas. It offers high crack-bridging and is ideally suited for renovations and renovations due to its low structural strength.

Lay out wedi Subliner Flex and cut it with cutter or scissors.
Comb wedi thin-bed mortar (wedi 320) using a notched trowel with 4 or 6 mm teeth on the prepared surface.
Insert wedi Subliner Flex with the printed side facing up butt-to-butt and press it with a rubber roller or wooden board.
Remove any leaking mortar and air pockets. Avoid cross joints.
After the thin-bed mortar has hardened, the coating can be laid.