What if the bathtub was history by tomorrow ...

That depends on the chosen surface.
All wedi Top surfaces – except the marble versions – are wheelchair accessible.

If tiling is used, the tiles should be at least 5 × 5 cm in size.
The shower area must also be accessible. In Germany, a clearance area of 150 × 150 cm is usually required – please check local building regulations for other requirements.

Of course – a seat can also be installed at a later stage, as the waterproofing is already in place.

The wedi Sanoasa corner seat is 100% compatible with the system and can be retrofitted without any issues.

For other seat types – such as fold-down seats – please note that reinforcement plates must be installed before the surface or tiles are laid.

The total renovation typically takes around 48 hours, depending on the project and drying times of the materials used.

Important drying time considerations:

Silicone joints must fully cure before being subjected to stress

Waterproofing slurries may require up to 3 days to dry before the shower can be used

Always refer to the relevant manufacturer’s instructions for proper curing and drying times.

To replace an old bathtub with a modern shower, it’s essential to involve a qualified plumbing specialist. The installation of pipework, drainage and connection to the existing system must be carried out professionally to ensure long-term functionality and to prevent water damage.

Thanks to its precisely fitting components, the wedi system itself is especially quick and straightforward to install. Nevertheless, it is strongly recommended that the work be carried out by a professional – for reliable results and complete peace of mind.

Grab rails can be securely installed – provided that the wall is properly prepared. This requires the inclusion of reinforcement plates during planning to ensure a firm and lasting hold.

This approach makes the shower area not only more comfortable, but also future-ready – ideal for anyone placing value on accessibility and safety.

wedi Top Line Design surfaces are available in a variety of colours – including solid shades, natural stone effects and elegant marble-look finishes. This allows for a truly personalised bathroom style.

For applications without finishing trims, we recommend using solid-coloured materials. These offer a particularly high-quality appearance and are – depending on the variant – suitable for either floor or wall installation.
A full overview of colours and materials can be found here.

Yes, a niche can be integrated – provided there is enough space within the wall. The wedi Sanwell niche is ideal for this, combining practicality with visual appeal.

Alternatively, the wedi Sanwell XL or XXL wall element with built-in niche can be used – for example, as a substitute for a glass partition. This creates extra storage space within the shower area without the need for additional shelves or accessories.