Erfahren Sie mehr
Nonstep Plan

Nonstep Plan

„Impact noise insulation boards specially for floor materials with slightly uneven areas.“

Product information

  • Impact sound deadening for uneven substrates: 16 dB
  • wedi Nonstep Plan impact sound deadening consists of a 6 mm wedi building board which is bonded in the factory to a 5 mm rubber matt resulting in an shiplap joint. The impact sound deadening board is used for the purposes of decoupling underneath ceramic floor coverings, laminate flooring or pre-fabricated parquet flooring.

All advantages at a single glance

Technical properties – Impact sound deadening board

Material base

polyurethane-bonded recycled rubber material with styrofoam flakes and a special, flexible, mineral coating
Thickness 6 mm
Format 1196 x 590 mm
Density 600 kg/m3
Tear strength 0,25 N/mm2
Compressive strength at 30% deformation 0,65 N/mm2
Static rigidity

s`= 56 MN/m3 at the linear start of the load deflection curve in accordance with DIN 53421
Dynamic rigidity

s`= 97 MN/m3 from resonant frequency 35 Hz at 2000 kg/m2 in accordance with EN 29052
Temperature resistance -40°C to 115°C
Fire behaviour E in accordance with EN 13501
Impact sound deadening

Δ L W,R = 14 dB in accordance with DIN EN ISO 140-8 (tested on concrete ceiling, under tiles)

Product sizes

Order no. Designation Length x width x thickness
011220000 wedi Nonstep Plan 1196 x 590 x 6 mm

In order to display YouTube videos, it is necessary that you accept marketing cookies. Please see our privacy policy for more information. To the cookie settings

Applications wedi Nonstep Plan

  • For decoupling ceramic and natural stone floor coverings from the substructure
  • For deadening impact sound when laying ceramic and natural stone floor coverings with a relatively low design height
  • On all load-bearing surfaces such as concrete, wooden floorboards (not stairs)
  • Underlay for floating floor coverings such as ready-to-lay  parquet or laminate
  • Not for use under electric thin-bed heating elements
  • For residential type use. Not approved for wheeled loads with high concentrated loads.

Surface requirements
The surfaces must be even, clean, load-bearing, dry and free of vibrations. Level out any unevenness before laying. Make sure that wedi Nonstep Plan covers the entire area.

Privacy Policy