Find your route faster:
To the homepage
Decide later DIY private customersCraftsmenArchitect & PlanerTraders

Product information

wedi Tools sealing tape includes a TPE-coated polypropylene fleece. This Sealing tape creates waterproof joints between wedi building boards; and wedi Fundo elements to other non-wedi materials, such as screed and plasterboard, etc.

  • Sealing tape roll, inside corners, outside corners, sealing gaiter

 

Technical Details

Technical properties - Sealing tape
TypeTPE-coated polypropylene fleece
Colourgrey
Overall thicknessapprox. 0.70 mm
Maximum longitudinal tensile strengthapprox. 104 N / 15 mm
Maximum lateral tensile strengthapprox. 23 N / 15 mm
Elongation at break, longitudinalapprox. 70%
Elongation at break, lateralapprox. 335%
Resistance to water pressure (1.5 bar)> 1.5 bar
Resistant to chemicalsspecified in accordance with construction and testing principles
UV resistance> 500 h
Temperature resistance-30°C / +90°C
  • Flush-to-floor shower Fundo Integro
    Fundo Integro
  • Flush-to-floor shower Fundo Integro
    Fundo Plano
  • Flush-to-floor shower element Fundo Primo
    Fundo Primo
  • Shower element Fundo Ligno Plus for suspended timber floors
    Fundo Ligno Plus
  • Corner shower point drainage
    Fundo Borgo
  • Round shower Fundo Trollo
    Fundo Trollo
  • Snail shower Fundo Nautilo
    Fundo Nautilo
  • Shower element wedi solso
    for wedi Solso
  • Fundo Plano Linea
    Fundo Plano Linea
  • Fundo Riolito Neo
    Fundo Riolito Neo
  • Fundo Riolito
    Fundo Riolito
  • Fundo RioLigno
    Fundo RioLigno
  • Fundo Riofino
    Fundo Riofino
  • Fundo Discreto
  • New
    Fundo sloping board
    Fundo sloping board
  • wedi building board
    Building board
  • Wedi building boards XL and XXL
    Building board XL and XXL
  • Vapor building board
  • Preline building board
  • Shower screen with and without niche
    Sanwell wall elements
  • wedi 610
    wedi 610 adhesive sealant
  • wedi 620 sealant
  • wedi 520 sealant

Downloads

abP building board and Fundo with Ardex X77
 
abP building board and Fundo with Kiesel
 
abP building board and Fundo with Mapei
 
abP building board and Fundo with PCI
 
abP building board and Fundo with Sakret
 
abP building board and Fundo with Schoenox
 
abP building board and Fundo with wedi 320
 
abP Fundo Plano
 
abP Fundo Plano Linea
 
abP shower system Linear Drain MiniMax
 
abP Subliner Dry
 
abP Subliner Dry & Flex
 
Brochure - Special solutions for suspended timber floors
 
Brochure - wedi at a glance
 
Brochure - wedi world of systems
 
ETA test certificate
 
Certificat - GEV EMICODE for wedi 610 Joint Sealant
 
Certificat - GEV EMICODE for wedi 620 Sealant
 
Certificate VOC-regulation
 
Technical datasheet - Sealing tape fleece laminated
 
Technical datasheet - Sanbath Wave
 
Technical datasheet - wedi 620 sealant
 
Certificate ISO 50.001 - Energy management system (valid from 2022-2025)
 
ISO 9001:2015 certificate
 

Usage

For secure sealing of corner, connecting and butt joints and intersections.

When sealing joints and intersections, wedi Tools sealing tapes must be cemented into the fresh sealant / epoxy resin adhesive and pressed in with a smoothing trowel, depending on the load. When using epoxy resin adhesive, the surface must be cemented over and sprinkled with quartz sand.

The wedi Tools sealing tapes must overlap by at least 5 cm.

What must be observed when preparing the substrate?

This content is provided by YouTube. By loading this content, you consent to the transfer of your data to YouTube / Google. You can find more information about this here: Google Privacy.