wedi Tool hulrumsdyvelsæt
Produktinformation
Tekniske egenskaber hulrumsdyvelsæt
The specified values refer exclusively to tiled building boards where the board’s thickness is a minimum of 20 mm. Installation on building boards with other finishes (plaster, etc.) is not permitted. For loads more than 25 kg (e.g. bath handrail) anchoring in a stable, load-bearing surface is required. This must be planned on site where necessary.
Allowable load | 0,12 KN |
Tekniske egenskaber wedi Tool hulrumsdyvelsæt
To fix light objects such as soap dishes, toilet paper holders, towel holders etc. to tiled wedi building boards/foam elements.
Drill a 6-mm hole. Remove drilling dust. Hammer in dowel.
The specified values refer exclusively to tiled building boards where the board’s thickness is a minimum of 20 mm. Installation on building boards with other finishes (plaster, etc.) is not permitted. For loads more than 25 kg (e.g. bath handrail) anchoring in a stable, load-bearing surface is required. This must be planned on site where necessary.