Product information
wedi Tools sealing tape includes a TPE-coated polypropylene fleece. This Sealing tape creates waterproof joints between wedi building boards; and wedi Fundo elements to other non-wedi materials, such as screed and plasterboard, etc.
- Sealing tape roll, inside corners, outside corners, sealing gaiter
Technical Details
Technical properties - Sealing tape | |
---|---|
Type | TPE-coated polypropylene fleece |
Colour | grey |
Overall thickness | approx. 0.70 mm |
Maximum longitudinal tensile strength | approx. 104 N / 15 mm |
Maximum lateral tensile strength | approx. 23 N / 15 mm |
Elongation at break, longitudinal | approx. 70% |
Elongation at break, lateral | approx. 335% |
Resistance to water pressure (1.5 bar) | > 1.5 bar |
Resistant to chemicals | specified in accordance with construction and testing principles |
UV resistance | > 500 h |
Temperature resistance | -30°C / +90°C |
Downloads
abP building board and Fundo with Ardex X77
abP building board and Fundo with Kiesel
abP building board and Fundo with Mapei
abP building board and Fundo with PCI
abP building board and Fundo with Sakret
abP building board and Fundo with Schoenox
abP building board and Fundo with wedi 320
abP Fundo Plano
abP Fundo Plano Linea
abP shower system Linear Drain MiniMax
abP Subliner Dry
abP Subliner Dry & Flex
Brochure - Special solutions for suspended timber floors
Brochure - wedi at a glance
Brochure - wedi world of systems
ETA test certificate
Certificat - GEV EMICODE for wedi 610 Joint Sealant
Certificat - GEV EMICODE for wedi 620 Sealant
Certificate VOC-regulation
Technical datasheet - Sealing tape fleece laminated
Technical datasheet - Sanbath Wave
Technical datasheet - wedi 620 sealant
Certificate ISO 50.001 - Energy management system (valid from 2022-2025)
ISO 9001:2015 certificate
Usage
- For secure sealing of corner, connecting and butt joints and intersections.
- When sealing joints and intersections, wedi Tools sealing tapes must be cemented into the fresh sealant / epoxy resin adhesive and pressed in with a smoothing trowel, depending on the load. When using epoxy resin adhesive, the surface must be cemented over and sprinkled with quartz sand.
- The wedi Tools sealing tapes must overlap by at least 5 cm.
What must be observed when preparing the substrate?
This content is provided by YouTube. By loading this content, you consent to the transfer of your data to YouTube / Google. You can find more information about this here:
Google Privacy.
